|
| 型 号 | 容量
（uf） | 耐压
（Volts） | 厚T/直径Ø
（mm） | 宽W
（mm） | 长L
（mm） | | 941C6P15K | 0.15 | 600 | 6.8 | 13 | 34 | | 941C6P22K | 0.22 | 600 | 8.1 | 14.3 | 34 | | 941C6P47K | 0.47 | 600 | 11.7 | 18 | 34 | | 941C12P15K | 0.15 | 1200 | 14.4 | 20.7 | 34 | | 941C12P22K | 0.22 | 1200 | 17.5 | 23.8 | 34 | | 941C12P47K | 0.47 | 1200 | 17.7 | 27.1 | 46 | | 941C12W1K | 1.0 | 1200 | 26.7 | 36.1 | 46 | | 941C12W1P5K | 1.5 | 1200 | 27.6 | 40.2 | 54 | | 930C12W2K | 2.0 | 1200 | Ø35 | - | 60 | | 930C12W3K | 3.0 | 1200 | Ø35 | - | 60 | | 930C12W3-3K | 3.0 | 1200 | Ø26 | - | 60 | | *注：930截面为圆形，941截面为椭圆形，以上尺寸由CED公司提供，如有改变以实物为准。 |
|
 | Type 930, Polypropylene Film Capacitors |  |
|
Metallized
Axial Leads
| High Voltage/High Frequency
Switching Power Supplies | | Type 930 axial-leaded, metallized polypropylene capacitors are available in a wide range of capacitance values in rduced sizes. Flame-retardant tape wrap and epoxy end seals provide moisture resistance. Used most frequently in high-voltag/high-frequency switching pewer supplies where superior stability and AC performance characteristics are important. This non-protected film capacitor has
Underwriters Laboratories, Inc. recognition for construction only. U.L. File Number assigned is E128034(N). | Specifications
Voltage Range: 100-630 Vdc (70-275 Vac)
Capacitance Range: 0.022-10 uF
Capacitance Tolerance: ±10% (K) standard
±5% (J) optional
Operating Temperature Range: -55℃ to 105℃ |
Dielectric Strength:200% (1 minute)
Dissipation Factor: 0.10% Max. (25℃, 1kHz)
Insulation ResiStance: 200,000 MΩ x uF
400,000 MΩ Min.
Life Test: 1000 Hours at 85℃ at 150% Rated Voltage |
Pulse Capability | Rated
Volts | Body Length | 0.750 | 1.000 | 1.250 | ≥1.750 | dV/dt - volts per microsecond, maximum | 100 | 25 | 14 | 10 | 6 | 250 | 37 | 21 | 15 | 9 | 400 | 49 | 28 | 20 | 13 | 630 | 74 | 43 | 30 | 19 |
NOTE: Other capacitance values, sizes and performance specifications are available. Contact us.
| Type 940C, High dV/dt, Round Polypropylene Film Capacitors | |
|
Double Metallized
Axial Leads | | | Type 940C round, axial film capacitors use polypropylene film and dual metallized electrodes for both self healing properties and high peak current carrying capability (dV/dt). This series features low ESR characteristics, excellent high frequency and high voltage capabilities. | Voltage Range: 600-3000 Vdc
Capacitance Range: 0.01-4.7 uF
Capacitance Tolerance:±10%
Operating Temperature Range: -55℃ to 105℃
*Full-rated voltage at 85℃-Derate linearly to 50%-rated Voltge at 105℃ |
NOTE: Other capacitance values, sizes and performance specifications are available. Contact us.
 Ratings and Dimensions
Cap.
uF | Catalog
Number | D
mm | L
mm | d
mm | Typical
ESR
milliohme | Typical
ESR
nH | dV/dt
V/us | I peak
A | IRMS
A | 1200Vdc (500Vac) | 0.100 | 941C12P1K | 15.5 | 34.0 | 1.0 | 9 | 22 | 1142 | 114 | 6.1 | 0.150 | 941C12P15K | 18.5 | 34.0 | 1.0 | 7 | 23 | 1142 | 171 | 7.6 | 0.220 | 941C12P22K | 21.5 | 34.0 | 1.0 | 7 | 24 | 1142 | 251 | 8.4 | 0.330 | 941C12P33K | 20.0 | 46.0 | 1.0 | 7 | 29 | 640 | 211 | 9.0 | 0.470 | 941C12P47K | 23.0 | 46.0 | 1.2 | 7 | 30 | 640 | 301 | 9.8 | 0.680 | 941C12P68K | 27.0 | 46.0 | 1.2 | 6 | 32 | 640 | 435 | 11.7 | 1.000 | 941C12W1K | 33.0 | 46.0 | 1.2 | 5 | 35 | 640 | 640 | 14.5 | 1.500 | 941C12W1P5K | 35.0 | 54.0 | 1.2 | 4 | 39 | 502 | 754 | 17.9 |
| | | Type 941C, High dV/dt, Round Polypropylene Film Capacitors | |
|
Double Metallized
Axial Leads | | | Type 941C round, axial film capacitors use polypropylene film and dual metallized electrodes for both self healing properties and high peak current carrying capability (dV/dt). This series features low ESR characteristics, excellent high frequency and high voltage capabilities. | Voltage Range: 600-3000 Vdc
Capacitance Range: 0.01-4.7 uF
Capacitance Tolerance:±10%
Operating Temperature Range: -55℃ to 105℃
*Full-rated voltage at 85℃-Derate linearly to 50%-rated Voltge at 105℃ |
NOTE: Other capacitance values, sizes and performance specifications are available. Contact us.
Ratings and Dimensions Cap.
uF | Catalog
Number | T
mm | W
mm | L
mm | d
mm | Typical
ESR
milliohme | Typical
ESR
nH | dV/dt
V/us | I peak
A | IRMS
A | 1200Vdc (500Vac) | 0.100 | 940C12P1K | 11.7 | 18.0 | 34.0 | 1.0 | 9 | 20 | 1142 | 114 | 6.7 | 0.150 | 940C12P15K | 14.4 | 20.7 | 34.0 | 1.0 | 7 | 21 | 1142 | 171 | 8.3 | 0.220 | 940C12P22K | 17.5 | 23.8 | 34.0 | 1.0 | 7 | 23 | 1142 | 251 | 9.2 | 0.330 | 940C12P33K | 14.6 | 24.8 | 46.0 | 1.0 | 7 | 21 | 640 | 211 | 10.0 | 0.470 | 940C12P47K | 17.7 | 27.1 | 46.0 | 1.2 | 7 | 28 | 640 | 301 | 10.9 | 0.680 | 940C12P68K | 21.7 | 31.1 | 46.0 | 1.2 | 6 | 30 | 640 | 435 | 13.0 | 1.000 | 940C12W1K | 26.7 | 36.1 | 46.0 | 1.2 | 5 | 32 | 640 | 640 | 15.9 | 1.500 | 940C12W1P5K | 27.6 | 40.2 | 54.0 | 1.2 | 4 | 36 | 502 | 754 | 19.7 |
|
|
|
| 
|
|
| 
